Knitting a pocket shawl with a simple stockinette body
A pocket shawl is a generous rectangular wrap with two practical patch pockets attached near the lower edges. Its shape is straightforward, making it a comfortable project for knitters who want to practise even tension, neat borders and basic seaming without committing to a fitted jumper. The finished shawl is useful around the house, on a chilly commute or over a summer dress when the evening cools down.
This version uses a simple stockinette-stitch body framed by garter-stitch borders. The fabric rolls naturally towards the right side, so the border is essential for keeping the wrap flat. Australian knitters can choose a local merino, a wool-acrylic blend or a breathable cotton blend, depending on whether the shawl is intended for Melbourne winter layers, a cool Tasmanian morning or Queensland air conditioning.
Choosing yarn, needles and dimensions
Select a yarn with enough drape to fold comfortably around the shoulders. A worsted or Australian 10-ply yarn creates a warm, substantial wrap, while an 8-ply yarn gives a lighter shawl that is easier to carry. Check the ball band carefully, as Australian yarn labels commonly use ply terminology rather than relying only on metres per 100 grams.
| Project choice | Useful option | Result |
|---|---|---|
| Warm winter shawl | 10-ply wool or wool blend | Thick, cosy and structured |
| Lightweight everyday wrap | 8-ply merino or cotton blend | Softer drape and less bulk |
| Needle size | 4.5–5.5 mm, adjusted for tension | Balanced stockinette fabric |
| Finished body | About 55–65 cm wide and 150–170 cm long | Comfortable shoulder coverage |
| Pocket size | About 20–23 cm wide and 22–25 cm deep | Room for keys, glasses or a phone |
The quantities depend on your finished dimensions and yarn weight, but a broad shawl generally needs around 700–1,000 metres. A yarn with a little wool is particularly forgiving because it blocks well and recovers after gentle wear. If you are working with a single skein, a single-skein shawl guide can help you think through yardage, though a pocket shawl normally requires considerably more yarn.
Always make a tension swatch before casting on the full piece. Knit in stockinette, wash the swatch as you plan to wash the shawl, then measure it once dry. A fabric that feels firm on the needles may become pleasantly soft after blocking, while a very loose fabric can stretch under the weight of the pockets.
Building the stockinette body
For a simple rectangular shawl, cast on a number of stitches that produces the desired width. As a starting point, 90 stitches in a 10-ply yarn may create a wrap around 55–60 cm wide, but your personal tension will determine the final result. Knit the first and last five stitches of every row in garter stitch, working the centre stitches in stockinette.
On the right-side rows, knit the border stitches, knit across the centre, then knit the final border stitches. On the wrong-side rows, knit the border stitches, purl the centre section, then knit the final border stitches. This creates a stable frame with a smooth central panel. Place removable markers after each border so the transition is easy to spot during a relaxed evening of knitting.
Keep the first stitch of every row slightly snug rather than pulling it tight. A firm edge can make the shawl look pinched, especially after washing. If you prefer a more pronounced frame, use eight garter stitches at each side and add a garter-stitch band across the top and bottom. The wider border also provides a clean visual line when the pockets are sewn on.
Continue until the shawl reaches your preferred length. A shorter wrap suits someone who wants a tidy layer under a coat, while a longer rectangle offers more coverage and allows the ends to hang down the front. Measure the work while it is resting flat instead of stretching it across your lap.
Planning and attaching the pockets
Pockets are easiest to make as separate rectangles. Knit two identical pieces in stockinette with a garter border on all four sides, or use a moss-stitch fabric if you want a firmer texture. A pocket measuring approximately 22 cm wide by 24 cm deep is large enough for everyday essentials without making the lower end of the shawl too heavy.
Work the pockets in the same yarn as the body for a quiet, coordinated finish, or use a contrasting shade for a handmade accent. A deep rust, eucalyptus green or ocean blue can bring character to a neutral oatmeal shawl without making the project difficult. Australian yarn shops often stock colour families from the same brand, which makes matching or contrasting easier when buying locally.
Checks for comfortable pocket placement
- Lay the blocked shawl flat before attaching anything.
- Position each pocket the same distance from its nearest side edge.
- Keep the pocket opening parallel to the shawl’s lower edge.
- Leave enough space below the pocket to preserve the drape.
- Test the placement with a few removable markers before sewing.
Use mattress stitch or small, tidy whip stitches to attach the side and bottom edges. Leave the top edge open, and sew through the border rather than pulling on the stockinette columns. A blunt tapestry needle and matching yarn will help the seam disappear. If the pocket contains heavier items, reinforce the upper corners with a few extra stitches.
Try the shawl on before completing the final seam. Stand naturally and check that the pockets sit where your hands fall, rather than too close to the sides or too low near the knees. This small adjustment makes the finished garment feel custom-made.
Keeping the edges neat
Stockinette curls because the knit stitches on the right side and purl stitches on the wrong side create different tensions. The garter border counteracts this movement, but blocking remains important. Soak the completed shawl in lukewarm water with a wool-safe wash, press out excess water in a towel and lay it flat to dry.
Pin the wrap into a rectangle, measuring the width at several points as you go. Do not stretch the fabric aggressively, especially if it contains alpaca, cotton or a loosely spun yarn. Let it dry completely before removing the pins. The pockets can be blocked separately, then shaped again after they are attached if the edges need a small adjustment.
Finishing details worth checking
- Weave in ends on the wrong side, changing direction several times.
- Inspect the side borders for loose or tight stitches.
- Secure pocket corners before trimming yarn tails.
- Check that both pockets are the same depth.
- Wash and dry the shawl before its first proper outing.
A rolled hem at the pocket opening can be intentional, but it may make the edge less comfortable against the hand. A few rows of garter stitch, seed stitch or ribbing will give the opening more stability. If you want a decorative finish, crochet a simple slip-stitch edging after blocking, using a hook suited to the yarn.
For knitters in Australia, care instructions deserve special attention. Strong sunlight can fade some dyed yarns, and a damp bathroom or enclosed laundry may slow drying during humid weather. Store the shawl folded in a drawer or breathable cotton bag rather than hanging it, which can stretch the shoulders and pocket openings.
Adapting the wrap for Australian wardrobes
A pocket shawl works across several Australian climates when the fibre and dimensions are adjusted. In cool Victoria or the Australian Capital Territory, a wool-rich yarn gives useful warmth over a long-sleeved top. In coastal New South Wales, a lighter merino blend may be more versatile, while cotton or linen blends are more comfortable during mild evenings in Brisbane or Perth.
The design also suits Australian clothing habits. It can replace a bulky cardigan when you are working from home, add warmth at an outdoor café, or sit across your lap during a winter footy match. The pockets are useful for a travel card, lip balm and phone, although a heavy set of keys may pull on the fabric. For a local market stall or handmade gift, practical details like these can make a simple knitted piece especially appealing.
Easy ways to personalise the pattern
- Add stripes every 10–12 rows in two compatible colours.
- Make the pockets in a textured stitch for extra visual interest.
- Use a long-tail cast-on for a flexible lower edge.
- Add a button or tie at the front if the wrap needs more security.
- Shorten the body for a compact shoulder cape.
If you are shopping for yarn online, compare metres per ball rather than weight alone. Two 100-gram balls can contain very different lengths, especially when comparing woollen-spun yarn with a plied cotton or alpaca blend. Allow extra yarn for the pockets, borders and swatching, since running short after the main body is complete can be inconvenient when postage from interstate or overseas takes several days.
A consistent stockinette centre keeps the project approachable, while the pockets, borders and finishing choices provide enough detail to keep the knitting engaging. With careful tension, balanced placement and gentle blocking, the result is a useful handmade layer that reflects both the simplicity of the stitch pattern and the character of the yarn.