How to read a knitting pattern with multiple sizes
Knitting patterns that offer several sizes can look intimidating at first. A single line may contain four, six, or even eight numbers, all separated by commas and parentheses. The key is to understand that these numbers are not competing instructions: each one belongs to a specific finished size.
Before casting on, set aside time to study the pattern’s layout, measurements, gauge, and abbreviations. A few minutes of preparation can prevent the most common mistakes, including choosing the wrong number, losing track of shaping, or discovering that the garment does not match the intended measurements.
The same approach works for sweaters, socks, baby garments, shawls, and accessories. Whether you are following a digital pattern from KRW Knitwear Studio or working from a printed book, careful organization makes multi-size instructions much easier to follow.
Start with measurements, not letter labels
Most modern patterns list sizes using letters such as XS, S, M, L, and XL. These labels are useful, but they are not universal. A medium in one designer’s pattern may have very different finished measurements from a medium in another, so never choose a size based on the label alone.
Find the finished measurements section and compare it with the body measurement chart. For a sweater, measure the fullest part of the chest or bust, then consider how much ease you want. Positive ease creates a loose fit, while negative ease gives a closer fit. For hats, socks, and gloves, compare the pattern’s circumference with the actual measurement of the intended wearer.
Pay attention to the difference between body measurements and finished garment measurements. The first describes the person; the second describes the knitted item. A pattern may recommend a size based on a 38-inch chest but produce a 42-inch finished chest, giving approximately four inches of ease.
Build a personal size key
Once you have selected a size, convert it into a visual marker. Write down the size letter, finished measurements, and the number or position it occupies in every multi-size list. For example, you might record: “Size M = third number throughout.” This simple note reduces the chance of accidentally switching sizes halfway through the project.
Read the sizing format carefully. Some patterns place numbers in parentheses after the smallest size, while others separate them with commas or use color coding. Instructions may say “cast on 80 (88, 96, 104) stitches,” meaning each number corresponds to a size in order. If your size is the third option, you would cast on 96 stitches.
Keep your size key beside the pattern rather than relying on memory. If the pattern is printed, circle or highlight only your selected figures. For a digital pattern, use a PDF annotation tool, but preserve the original file so that the markings remain easy to review later.
Separate fixed instructions from changing numbers
Not every number in a pattern relates to size. Some figures describe needle sizes, row counts, repeat lengths, stitch markers, or measurements in centimeters and inches. Before choosing a number, identify what the number is measuring.
A useful habit is to read the complete sentence before acting. In “work until piece measures 8 inches, ending after a wrong-side row,” the 8 inches is a length instruction, not a size choice. In “increase 6 (8, 10, 12) stitches,” the numbers correspond to sizes. In “repeat rows 1–4 six times,” the six is a repetition count that may apply to every size.
Abbreviations can create similar confusion. “K2tog” means knit two together, while “k2” means knit two stitches. “M1L” and “M1R” identify different increase directions. Review the abbreviation list before beginning, especially when a pattern includes shaping or textured stitches.
| Pattern detail | What it usually means | How to handle it |
|---|---|---|
| 72 (80, 88, 96) stitches | A size-specific cast-on or stitch count | Select the number assigned to your size |
| Work for 10 inches | A fixed length or measurement | Follow the same measurement unless the pattern says otherwise |
| Repeat 4 times | A repetition instruction | Repeat the stated sequence, regardless of size |
| Decrease every 6th row | A shaping schedule | Track rows carefully and check whether all sizes share it |
| 3 (4, 5) buttonholes | A size-specific feature count | Use the number for your chosen size and space them evenly |
| 24-stitch cable repeat | A stitch-pattern structure | Keep the repeat intact unless the pattern gives a size adjustment |
Track stitch counts after every shaping step
Multi-size patterns often become difficult during increases and decreases because several numbers appear close together. After each shaping section, count your stitches and compare them with the expected total. This catches errors while they are still easy to correct.
Suppose a sleeve begins with 48 (52, 56, 60) stitches and the pattern says to increase four times evenly. For the third size, you would begin with 56 stitches and finish with 60, assuming one stitch is added at each increase. Writing “56 → 60” in the margin makes the instruction concrete.
Pay special attention to shaping around armholes, necklines, sleeve caps, and sock gussets. Some patterns give separate instructions for different sizes in consecutive paragraphs. Place a removable marker beside the paragraph that applies to your project, and cross out completed shaping rows on a photocopy or working printout.
If the stitch count does not match, stop before continuing. Check whether you missed an increase, worked a decrease twice, or misunderstood whether a stated count includes edge stitches. Fixing a small discrepancy immediately is usually easier than undoing several inches of knitting.
Understand repeats and size-specific exceptions
Many garments use a stitch pattern that must fit within a certain number of stitches. This may involve cables, lace, colorwork, or ribbing. The main body size can change while the repeat remains constant, so the pattern may add or remove plain stitches at the edges.
Look for phrases such as “work stitches in pattern as established,” “maintain the 12-stitch repeat,” or “continue until piece measures.” These instructions assume that you understand which section repeats and which stitches act as borders. Mark the beginning and end of each repeat with stitch markers if the pattern allows it.
Size-specific exceptions are often written in compact language. A line such as “for sizes 3 and 4 only, work one additional repeat” means the smallest sizes should skip that instruction entirely. When a sentence excludes your size, do not try to adapt it automatically. Continue to the next instruction unless the pattern directs you to do something else.
Accessories can use the same construction principles. For example, a cable pattern may have a fixed repeat even when the total hand circumference changes. Studying a clearly explained project such as these cabled fingerless gloves can help you see how stitch counts, repeats, and shaping work together in a smaller item.
Use gauge and swatching as part of sizing
Gauge is one of the most important parts of a multi-size pattern because it determines the finished dimensions. If a pattern specifies 20 stitches over 28 rows in 4 inches, your swatch should match those figures after blocking. A different stitch gauge can make the finished garment significantly wider or narrower.
Measure gauge across the center of the swatch, avoiding the edge stitches. Block the swatch in the same way you plan to treat the finished project, then allow it to dry completely before measuring. Different yarn fibers can relax or grow during washing, so an unblocked swatch may give unreliable information.
Row gauge matters when the pattern uses measurements, but stitch gauge is especially critical for circumference. If your stitch gauge is slightly off, changing needle size may solve the issue. If your row gauge differs while stitch gauge is correct, follow the pattern’s measurements rather than blindly copying its row count when possible.
Yarn substitution can change gauge, drape, and fabric density even when the replacement yarn has a similar weight. Swatch with the actual yarn and needles, and remember that cables and colorwork often pull the fabric inward. A textured swatch may need to be larger than a plain stockinette swatch before you can judge the fit accurately.
Create a simple tracking system
A reliable tracking system does not need to be complicated. Use a row counter, pencil marks, removable highlighter strips, or a project notebook. Record the selected size, cast-on number, current row, and next shaping instruction before putting the project down.
For charts, mark the row you are working and identify the right-side direction. For written instructions, underline the active sentence and place a check beside each completed repeat. If a pattern has several sections, use separate notes for the body, sleeves, neckline, or each sock.
A practical workflow looks like this:
- Highlight or circle every number belonging to your chosen size.
- Write the selected size and starting stitch count at the top of the pattern.
- Record stitch totals after cast-ons, increases, decreases, and joins.
- Use stitch markers to divide long repeats and shaping sections.
- Recheck measurements after blocking before making major fit decisions.
Do not assume that a mistake means the entire project must be abandoned. Compare the actual stitch count with the expected count, identify the row where they diverged, and decide whether a small correction can be hidden or whether you should unravel. Prompt corrections protect both the fabric and your confidence.
When a pattern feels unclear, read the surrounding instructions rather than focusing on one confusing line in isolation. Many details become understandable once you see what the next step is meant to achieve. A well-organized pattern should guide you from measurements to gauge, construction, shaping, and finishing in a logical sequence.
With a size key, accurate swatch, visible markers, and regular stitch counts, patterns with multiple sizes become manageable working documents rather than walls of numbers. Choose your measurements carefully, prepare the instructions before casting on, and let each checked step build a more accurate, enjoyable knit. Explore more pattern resources and learning materials through KRW Knitwear Studio as you develop confidence with increasingly detailed projects.